PATONA WB1-11 Manual página 16

C) Connect via Bluetooth
1. Add a new device.
2. Enter the number of the Wallbox, which is shown on the Wallbox display, into
the app or scan the QR code.
3. Enter the password 123456 (can be changed later).
4. Then connect the Wallbox to the app.
D) Pairing
If a connection is established, you will see „connectable" next to the Wallbox
number.
1. Tap on the device number and wait about 10 seconds, the pairing is now
established, the next steps can take place.
2. If the pairing does not work, please switch off Bluetooth of your smartphone,
wait 3 seconds and activate Bluetooth again.
3. Then start the pairing process again.
- 16 -