AFG 3.1AT Manual Del Propietário página 8

ASSEMBLY STEP 3
HARDWARE FOR STEP 3 :
ALL
BOLT (G) SPRING WASHER (B)
MODELS
20 mm 8.2 mm
Qty: 6 Qty: 6
CONSOLE
CONSOLE MAST CAP
ARC WASHERS (C)
SPRING WASHERS (B)
BOLTS (G)
CONSOLE MAST
14
31AT_51AT_OM_Rev1_4.indd 14-15
Open HARDWARE FOR STEP 3.
A
B Connect the CONSOLE CABLES, carefully
ARC WASHER (C)
tucking wires in masts to avoid damage. It may
8.2 mm
Qty: 6 be helpful to have a second person for this step.
Gently place the CONSOLE on top of the
C
CONSOLE MASTS. Attach the LEFT SIDE first
using 3 BOLTS (G), 3 SPRING WASHERS (B)
and 3 ARC WASHERS (C).
CONSOLE CABLES
NOTE: Be careful not to pinch any wires
while attaching the console.
Attach the RIGHT SIDE of the CONSOLE
D
using 3 BOLTS (G), 3 SPRING WASHERS (B)
and 3 ARC WASHERS (C).
ASSEMBLE
THIS SIDE
FIRST
E Completely tighten all bolts from step 1.
3.1AT ASSEMBLY STEP 4
HARDWARE FOR STEP 4 :
SCREW (L)
20 mm
Qty: 4
MAIN FRAME BOOT
SCREWS (L)
* This step is for 3.1AT models only.
A Open HARDWARE FOR STEP 4.
B Slide MAIN FRAME BOOT down over MAIN FRAME
BRACKET.
C Attach MAIN FRAME BOOTS using 4 SCREWS (L).
8/29/11 8:59 AM
3.1 AT
ONLY
15