Idiomas disponibles
Idiomas disponibles
General
• Always remove the mains plug after use. Allow the device to cool down
completely before storing it.
• If you observe damage to the device or the power cable, remove the mains
plug immediately. Ensure that the device is checked immediately by an
electrician. It may only be put into operation once again after repairs have
been correctly carried out (see chapter 5).
• Keep the safety instructions in a safe place.
2
General
Before first operating the HKP 2.0 E adhesive pistol, please read this operat-
ing manual carefully and thoroughly through. Please pay special attention to
the safety information in chapter 1.
This operating manual must be available to every user.
All position numbers stated in this operating manual (e.g. "hook nozzle (1)")
apply to the figure on page 2.
2.1
Scope of application
The HKP 2.0 E is intended for use with Döllken hot-melt adhesive in candle
form (correct intended use).
Any other usage is unauthorized.
2.2
Specifications
Description
Included in delivery
Dimensions [mm]
Weight [g]
Operational voltage [V AC]
Power consumption [W]
Insulating Class
Safety class
Working temperature [°C]
Controller
Adhesive
Adhesive performance [kg/h*]
H1079XM_230117.indd 10
HKP 2.0 E
adhesive pistol, instruction handbook
390 x 230 x 90
1,100
220 to 240, 50 Hz
600
Class 1
IP20
200 non-adjustable
electronic
Döllken hot-melt adhesive, Ø 18 mm
3.5 with switching step „+"
2.1 with switching step „-"
non-adjustable
10
GB
24.01.23 10:22
