Cameo F2 FC IP Manual De Usuario página 21

Settings
Display = Display rotation
Flip
Display = Display lighting
Time off
DMX fail = Operational status
with DMX signal fault
Dimmer = Dimmer curve
curve
Dimmer = Dimmer response
response
Red Shift = accurately mimics
the colour drift
of dimming a
halogen spotlight.
When dimming the
spotlight, the colour
temperature changes
automatically to
increasingly warm
white and amber
(and vice versa).
PWM Fre- = LED PWM frequency 600 Hz /
quency
Standing No rotation of the display
Position
Hanging Display is rotated by 180°
Position (e.g. for overhead installation)
Display always On permanently
on
Display off Deactivates after approximately 20
after 20s seconds of inactivity
Hold Last command is retained
or blackout, Activates blackout
User Colour 8 activates User Color 8
Linear Light intensity increases linearly with
DMX value
Exponential Light intensity can be finely adjusted at
lower DMX values and broadly adjusted
at higher DMX values
Logarithmic Light intensity can be broadly adjusted at
lower DMX values and finely adjusted at
higher DMX values
S-curve Light intensity can be finely adjusted at
lower and higher DMX values and broad-
ly adjusted at medium DMX values
LED Light responds abruptly to changes in
DMX value
Halogen Light behaves like a halogen spotlight
with slight brightness changes
No Colour drift is disabled
Dim To Warm Colour drift is enabled
Configuration of LED PWM frequency
1200 Hz /
2000 Hz /
4000 Hz /
6000 Hz /
25 kHz
21