kooa GEAR 3S Manual De Instrucciones página 25

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 58
Direct Drive
After use
‚ We recommend that you occasionally use the battery until it is fully discharged to
maintain its charging capacity.
‚ To charge the trimmer, put it back in the charging tray or plug it into the power
outlet via the mains adaptor.
‚ Ensure you charge the battery when the display shows a red indicator in the form of
a small plug.
Cleaning and care
Electric shock HAZARD
− Do not dip the device, charging tray and mains adaptor in water and
do not rinse them under running water.
NOTE on material damage
− Do not use aggressive chemical cleaning agents, abrasives, hard
sponges or the like for cleaning. Doing so could damage the housing
surface.
Clean and lubricate the device regularly to ensure its proper functioning. Always switch
off the device before any cleaning and maintenance work.
The trimmer can be connected directly to the
mains adaptor for charging or trimming.
1. Plug the mains adaptor into a power outlet.
2. Connect the plug directly into the trimmer
socket.
The display shows the maximum battery
charge.
The battery will no longer be
charged when operating the
trimmer this way.
25
loading

Productos relacionados para kooa GEAR 3S