Idiomas disponibles
Idiomas disponibles
NOTICE! Damage hazard
• Observe the technical data (see
• Never put cables for 12 V voltage and 230 V voltage in the same cable duct.
• Cable routing must be performed with suitable cable diameters and external strain relief.
• Before drilling any holes, ensure that no electrical cables or other parts of the vehicle can be dam-
aged by drilling, sawing and filing.
Consider the following notes for the installation location:
• To avoid overheating install the device in a well-ventilated place.
• Protect the device from direct sunlight and other heat sources.
• Do not place the device on surfaces that are easily flammable (e.g. paper, cloth, etc.).
• Do not install the device in environments that have a high humidity or come in direct contact with splashes of
water or liquids.
1.
For power connections choose cables with a cross section of 35 mm² for connections less than 2 m and
50 mm² for connections longer than 2 m.
2. Choose signal cables (relay coil) with a cross section of 1 mm².
3. Fix the device to a suitable place.
fig.
on page 1
4. Connect the device according to the circuit diagram.
fig.
on page 1
Item in fig.
1
2
3
4
8 Cleaning and maintenance
The device is maintenance-free.
9 Disposal
Place the packaging material in the appropriate recycling waste bins wherever possible. Consult a local
recycling center or specialist dealer for details about how to dispose of the product in accordance with
the applicable disposal regulations. The product can be disposed free of charge.
10 Warranty
The statutory warranty period applies. If the product is defective, please contact the manufacturer's branch in your
country (see dometic.com/dealer) or your retailer.
Technical data
Description
Relay
House battery
Starting battery
Alternator
).
EN
5
