Manuales relacionados para Truper COMP-50LV
Resumen de contenidos para Truper COMP-50LV
- Página 1 Manual Air compressor 116 PSI Pressure Applies for: Code Model 19360 COMP-50LV COMP-50LV Read this manual thoroughly CAUTION before using the tool.
- Página 2 Contents CAUTION Technical Data Power Requirements To gain the best performance of the tool, prolong the duty life, General Power Tool Safety Warnings make the Warranty valid if necessary, and to avoid hazards Safety Warnings for Air Compressors of fatal injuries please read and understand this Manual before Parts using the tool.
- Página 3 Technical Data COMP-50LV Code 19360 Description Air Compressor Voltage 127 V Frequency 60 Hz Motor Power Rated: 2 1/2 Hp Maximum: 3 1/2 Hp Current 12 A Maximum Pressure 116 PSI Speed 3 450 RPM Continuous Air flow 4.4 CFM - 40 PSI 3.4 CFM - 90 PSI...
- Página 4 General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
- Página 5 Safety Warnings for Air Compressors Before Using the Compressor While operating the compressor CAUTION CAUTION • The pressurestat produce sparks while • Do not aim nozzles, sprinklers or air jet operating. If sparks have contact with gasoline or other towards people or animals. WARNING solvents, vapors could ignite causing fire or explosion.
- Página 6 Parts Motor Cover Filter Carrying Handle Pressure Release Valve Oil Cap Switch Pressurestat Oil Level Spyhole Check Valve Tank Filter Pressure Gauge Pressure Outlet Thermal Regulator Switch Regulated Pressure Outlet Gauge Power Cable Regulated Air Outlet Valve (fast connection) Tank Assembly Carefully lay down the compressor onto a flat, leveled and solid surface to assemble the wheels and the rubber...
- Página 7 Preparation • The air compressor delivers energy to pneumatic tools as versatile as power tools, therefore, it can be used to drill, screw, nail, rivet, staple, chisel, polish, torch, clean, paint, etc. • The compressor is totally automatic, controlled with a pressurestat that stops the motor when the tank pressure reaches the maximum level and start back when the level is lower to 87 PSI •...
- Página 8 Star Up ON and OFF • Before operating the compressor set it onto a flat leveled surface with good ventilation and away from flammable objects, like drapes, etc. Leave at least 12” free space around the compressor to allow air circulation. •...
- Página 9 Maintenance Oil Change • After the 50 hours operation change oil. Remove the drain cap (A). Set back the cap and fill up the tank as indicated in page 7. The subsequent oil change shall be carried out each 150 hours’ work. Cleansing and Care •...
- Página 10 Troubleshooting Problem Cause Solution The motor is not • There is no power supply. • Make sure the power cable is connected. Check the fuse - circuit running. switch. • Blown out fuse. • Replace the blown-out fuse. • The thermal switch is activated. •...
- Página 11 Authorized Service Centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 018-7873 to get information about the nearest Service Center.
- Página 12 It includes the costs of transportation of the product that derive from its fulfillment of its service network. . Phone number 800-018-7873. Made in China. Imported by Truper, S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257, Phone number 761 782 9100.