VALBERG CNF 327 E X742C Instrucciones De Uso página 5

B
Using the appliance
WARNING:
It must be possible to disconnect the appliance from the
mains power supply; the plug must therefore be easily
accessible after installation.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond
to your domestic power supply. Tha appliance must be earthed. The power supply cable plug
is provided with a contact for this purpose. If the domestic power supply socket is not earthed,
connect the appliance to a separate earth in compliance with current regulations, consulting a
qualified electrician. The manufacturer declines all responsibility if the above safety precautions
are not observed. This appliance complies with the E.E.C. Directives.
Door Reversibility
Before reversing the door, please be prepared below tools and material: straight screwdriver,
cross screwdriver, spanner and the components included in the poly bag:
Left Aid-Closer on Upper
Left Door Hinge Cover x 1
Left Aid-Closer on Lower
Door x 1 Door x 1
6 EN
B
Using the appliance
1. Unscrew top hinge cover and then unscrew the top hinge . Then lift upper door and place it on
a soft pad to avoid scratch and damage.
2. Remove the top left screw cover
3. Take off the upper door, take out the screw from the middle hinge by cross screwdriver, then
take off the lower door.
7 EN