VITO PRO-POWER VIASL75 Manual De Instrucciones página 30

Aspirador industrial de solidos y liquidos
Idiomas disponibles

Idiomas disponibles

EN
4. Hold the handle of the waste
container (16) and turn over the shaft
of the folding container holder of the
waste (19);
5. Pour the contents of the container
into a bag or box to put in the trash.
6. After empty, place the container in
an upright position and place the bag
filter;
7. Mount the vacuum cleaner head and
reconnect the vacuum cleaner.
When vacuuming liquids (Fig. K1):
1. Stop the vacuum cleaner;
2. Unscrew the latches (6) and remove
the head from the vacuum cleaner (7);
3. Remove the liquid (5) drain hose
from the attachment and remove the
cover.
4. Empty the contents into a container.
5. Mount the vacuum cleaner head and
reconnect the vacuum cleaner;
5. MAINTENANCE
INSTRUCTIONS
Whenever you perform maintenance or
cleaning on the vacuum cleaner, turn
off the power switch and unplug the
power cord.
When the filters are dirty, the suction
decreases considerably. Clean the
filters regularly to increase working
efficiency and prolong the life of the
vacuum cleaner. Never use the vacuum
cleaner without filters.
The "ON / OFF" buttons are protected
with a watertight cover. If this cover is
damaged, replace it with a new one.
30
5.1 - HEPA FILTER CLEANING
(FIG. L)
1. Unscrew the securing catches (6)
and remove the head from the vacuum
cleaner (7);
2. Unscrew (25) the filter (25)
attachment, anti-clockwise;
3. Remove filter, rinse with water until
clean and allow to dry
4. Fit the filter and assemble the
remaining components in the reverse
order of disassembly. The filter to be
placed dry.
5.2 - CLEANING THE BAG
FILTER (FIG. M)
1. Unscrew the securing (6) catches
and remove the head from the vacuum
cleaner (7);
2. Check the condition of the bag filter
(26). If it is very dirty, wash with water
and allow to dry.
3. When the filter is completely dry,
install it and mount the vacuum cleaner
head.
5.3 - CLEANING AND STORAGE
Cleaning
After each use, clean all components of
the vacuum cleaner. Clean the tool with
a clean, damp cloth or blow with low
pressure compressed air.
Careful handling protects the power
tool and extends life.
Storage
Store the tool in the transport carton in
a clean, dry place and out of the reach
of children.
The
ideal
storage
is between 5 and 30 ° C. Store
the vacuum cleaner in its original
packaging.
6. ENVIRONMENT
PROTECTION
The packaging is made up
of recyclable materials, which
you can dispose of through local
recycling points.
Never
appliances in the
household waste!
According to the European Directive
2012/19 / EC on waste electrical
and electronic equipment and its
transposition
used power tools must be collected
separately
collection sites provided for this
purpose.
You can obtain information about
disposal of the used device through the
legal responsible for recycling in your
municipality.
7. COSTUMER SUPPORT
Tel.: 256 331 080
Site: www.centrallobao.pt
temperature
place
electrical
into
national
law,
and
delivered
to
the
loading