Idiomas disponibles
Idiomas disponibles
1
Press the red OFF button, on the control panel, and
disconnect the equipment from the power supply.
IMPORTANT: the equipment must be stopped and
disconnected before manipulating it.
3
Loosen the 4 side knobs as shown in the next image.
IMPORTANT: The equipment must be stopped and
disconnected before handling it in any way.
5
Using a 24mm fixed spanner and the tubular socket
wrench, unscrew and remove the upper nut as
shown in the image (1). Repeat the process on the
opposite side, as shown in the image (2).
Image (1)
X
6
Image (2)
2
Using an Allen key Nº 4, first unscrew the four
head bolts and then remove the head and clean it.
4
Remove the front fairing. IMPORTANT: The equip-
ment must be stopped and disconnected before
handling it in any way.
Using the 24mm fixed spanner and the tubular
socket wrench, screw the lower nuts as shown in the
image (1). Look at how the rollers move apart, see
image (2).
Image (1)
Image (2)
26
