NOTE:
•
Lithium battery does not have memory effect, therefore to prolong the battery life please fully
charged the battery before storage. This will reduce battery self discharging characteristics.
If the voltage of the battery is too low, it'll automatically lock itself. If the tool feels lack of
power, please stop the operation and charge the battery immediately. If the battery is stored
more than 3 months, please charge the battery first before operation.
•
If the tool does not function, please clear all debris and restart again. If malfunction
continues malfunctions, please remove the battery immediately and contact the local service
dealers for assistance.
•
The battery pack will become slightly warmer while charging. This is normal and does not
indicate a problem.
•
Do not place charger in an environment either extreme hot or cold. It will work best at normal
room temperature.
•
When the battery is fully-charged, unplug your charger from the power supply and remove
the battery pack from the charger.
CAUTION: To prevent damage to the battery pack, remove the battery pack
immediately from the charger when no charger LED lights. Return battery pack and
charger to your dealer for checking or replacing. Do not insert a battery pack into a
damaged charger, it may damage your battery pack.
1. The tool is applied with the battery capacity indicator (A) on the top pad for easy view.(Fig.3)
2. The remaining battery power is shown as lights by three alphabetic symbols when the trigger
pressed; when the trigger released, the button stays lighted is shown the speed mode the
tool performs and will last approximately 60 seconds.
3. Either the indicator light blinks or none indicator lights, the battery capacity has run out, so
the tool does not operate. In these cases, charge the battery or replace the dead battery by
a fully-charged on.
4. When two or more indicator lights do not light even after charging is complete, the battery
has reached the end of its service life.
BATTERY CAPACITY INDICATOR
Fig.3
25