Bestway LAY-Z-SPA S200202 Manual Del Propietário página 4

• Install at least 2m from all metal surfaces.
• No part of the appliance is to be located above the
bath during use.
• Parts containing live parts, except parts supplied with safety
extra-low voltage not exceeding 12V, must be inaccessible
to a person in spa pool; Parts incorporating electrical
components, except remote control devices, must be
located or fixed so that they cannot fall into the spa pool.
• For electric safety, a PRCD is incorporated in the power
cord. If the current leakage is detected more than10mA, the
device will operate and cut-off the power supply. In such
case, please unplug and stop using the spa at once. Don't
repair the product by yourself. Visit our website
www.bestwaycorp.com to get the necessary information.
• If the supply cord is damaged, it must be replaced by the
manufacture, service agent or similarly qualified persons in
order to avoid a hazard.
• To reduce the risk of electric shock, do not use extension
cord to connect unit to electric supply; provide a properly
located outlet.
WARNINGS - TO REDUCE THE RISK OF INJURY
• The water in a spa should never exceed 40°C (104°F).
Water temperature between 38°C (100°F) and 40°C (104°F)
is considered safe and comfortable for a healthy adult.
Lower water temperatures are recommended for young
children and when spa use exceeds 10 minutes.
• Since excessive water temperatures have a high potential
for causing fetal damage during the early months of
pregnancy, pregnant or possibly pregnant women should
limit spa water temperature to 38°C (100°F). Limit use to
10 minutes at a time.
• If you feel the water is too hot, before entering a spa, the
user should measure the water temperature with an
accurate thermometer. If the water temperature is above
45°C (113°F), stop use of the spa until the temperature is
4