Idiomas disponibles
Idiomas disponibles
Wall Fan with Remote Control Use Instructions
Connect the plug to the wall socket. To switch the fan on, press the ON key; the fan activates at low speed. Press
the ON key again to increase the fan speed (3 fan speeds are available: low – medium – high).
Press the swing mode key to activate swing mode, press the key again to deactivate the function.
Press the mode selection key to select the desired fan mode:
Normal: the fan operates at selected speed constantly, until switch off
Nature: the fan recreates a natural breeze, alternating all speed in cycle
Sleep: fan speed decreases by one level every half an hour, setting to the low level until switch off
Press the timer key to activate this function; it is possible to set the automatic switch off time of the fan from 0,5
to 7,5 hours, at 0,5 hours intervals. Press the timer key repeatedly until the desired option is set.
All above described functions are also selectable from the provided remote controller. Insert 2 alkaline batteries
type AAA, paying attention to the marked polarity. Make sure to always point the RC sensor directly to the recei
ver on the fan. Make sure to use the RC at a distance not further than 5 meters when in front of the fan, and not
further than 3 meters when at the side of the fan (approx. 30° left and right).
Cleaning and maintenance
Unplug the fan from the wall socket. Remove dust and stains with a soft cloth, slightly dampened – use a mild
detergent if necessary.
Important: do not let water or other liquids penetrate inside the fan
Do not use abrasive detergents and/or solvents, to avoid damaging the fan surface.
Wait until the fan is completely dry before use, When not used for a long period of time, it is advisable to store
the fan in a cool and dry place, away from dust and direct sunlight.
Technical data
Power: 40 W
220240V 50HZ
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
12
