Idiomas disponibles
Idiomas disponibles
Wall Fan with Remote Control Use Instructions
In case of malfunctions or abnormal noises, immediately interrupt
the operation of the appliance.
This appliance can be used by children 8 years of age or older, and
by people with reduced physical, sensory or mental abilities, or with
limited experience and knowledge, provided they have been sup
plied with complete instructions on the safe use of the appliance.
appliance and that they understand the associated risks.
Children must not play with this appliance.
Cleaning and maintenance cannot be carried out by unsupervised
children. For the safety of children and pets, remove and dispose
of all packaging material before use.
This fan is intended for home use only, as described in this manual.
Any other use is to be considered improper and, therefore, dange
rous.
Description of the item
1. Front grid
2. Central disc
3. Grid blocking screw
4. Grid blocking clips
5. Blade blocking nut
6. Blade
7. Rear grid blocking bolt
8. Front grid blocking bolt
9. Rear grid
Mounting and assembling Fig.A-B
Proceed with mounting and assembling as shown in Fig. A and B (a).
The wall mounting anchors provided with fan are suitable for installation on concrete and brickwork; for in
stallation on other types of walls and materials (e.g. drywall, woodwall, etc.) use wall anchors with width and
depth suitable for the type of wall and able to support the weight of the fan.
Make sure the fan is securely mounted on the wall and that all its components are firmly fastened before use,
to avoid accidental falls and/or dangerous vibrations during use.
Operation Fig.B
Remote controller
1. Swing mode key
2. Timer key
3. ON/speed selection key
4. Mode selection key
5. OFF key
Control panel
1. Night mode LED indicator
2. Swing mode key
3. ON/speed selection key
4. OFF key
5. Mode selection key
6. Nature mode LED indicator
7. Normal mode LED indicator
10. Motor shaft
11. Motor case
12. Remote controller
13. Wall mounting bracket
14. Wall mounting anchors
15. Wall mouting screws
16. Tilt adjusting pin
17. Control panel
18. Main unit
11
EN
