Imetec M2902 Instrucciones De Uso página 15

• During use, when the plates heat and cool, position the appliance
on a smooth and heat resistant surface.
• While straightening, careful not to bring the heated parts to close
to sensitive parts of the face, ears, neck or skin.
• After use, allow the styler to cool down completely before putting
it away.
WARNING! This appliance is not to be
used if it has been dropped or if there
are visible signs of damage.
WARNING! DO NOT use this appliance
near bathtubs, showers, basins or
other vessels containing water. Never
place the appliance into water.
WARNING! Risk of fire. DO NOT use
flammable products on hair or on the
appliance.
PREPARING YOUR HAIR
• Wash hair as normal and comb to remove knots.
• Dry your hair and brush from the roots to the ends.
• Divide hair into sections and start straightening from the nape of
the neck.
INSTRUCTIONS FOR USE
• Connect the power cable (5) to the mains and place the appliance
on a smooth and heat resistant surface.
• Set the required temperature on the wheel (7). The temperature
range is between 150°C and 210°C, depending on your type of
hair and the effect you wish to achieve.
• The temperature can be changed at any time by turning the wheel
(7) clockwise (to increase the temperature) or anti-clockwise (to
lower the temperature).
• Use the heat resistant glove (8) to avoid any accidental burns.
• Take a lock of hair, not too wide and not too thick, between your
fingers (approx. 2 cm), with smaller locks the curls will be more
defined.
• Hold the product with the tip pointing downwards and wrapping
the lock starting from the largest end and finishing at the thinnest
end.
• Hold in place for a few seconds
• Release it, unwinding the lock in the opposite direction
• The appliance is equipped with self-switch-off function after not
USE
EN