Idiomas disponibles
Idiomas disponibles
2
1
1.
DC 19V jack
Connect the included AC adapter to this jack.
The AC adapter is designed specifically for the VOX
Ukulele 50. Do not use any other adapter, otherwise a
malfunction may occur.
2.
Cord hook
Wrap the AC adapter cord around this hook to prevent the
AC adapter from being accidentally disconnected.
3.
LINE OUT jack
Connect your PA system to this jack.
4.
INSTRUMENT jack
Connect your ukulele to this jack.
5.
PHASE switch
Use this switch to reverse the phase of the input to the
INSTRUMENT jack.
This counteracts low-frequency range phase interference
with the input from the MIC jack and suppresses howling in
the low-frequency range.
6.
INSTRUMENT VOLUME knob, CLIP indicator
Use this knob to adjust the volume level of the ukulele. The
CLIP indicator lights up if the volume level of the connected
ukulele is too high. Clipping could distort the sound and re-
duce the sound fidelity. To avoid clipping, use the INSTRU-
MENT VOLUME knob to adjust the volume level.
7.
INSTRUMENT equalizer
Use this knob to adjust the sound of the INSTRUMENT
channel.
BASS knob
Use this knob to adjust the sound in the low-frequency
range.
MIDDLE knob
Use this knob to adjust the sound in the mid-frequency
range.
TREBLE knob
Use this knob to adjust the sound in the high-frequency
range.
As each knob is turned to the right, the range corre-
sponding to the knob will be emphasized. However, if
a range is overemphasized, feedback (howling) will be
more likely to occur.
Panel description and functions
VOX Ukulele 50
3
8.
Use this knob to adjust the depth of the chorus, reverb or
chorus+reverb effect for the instrument connected to the
INSTRUMENT jack.
Use this knob to select the effect type and adjust the effect
parameters. When this knob is fully turned to the left, all
effects are off.
9.
Connect your microphone to this jack.
10.
Turn this switch on when a condenser microphone that
requires phantom power is connected.
11.
Use this knob to adjust the volume level of the microphone
connected to the MIC jack.
This indicator lights up if the volume level of the connected
microphone is too high. Clipping could distort the sound
and reduce the sound fidelity. To avoid clipping, use the
MIC VOLUME knob to adjust the volume level.
12.
Use this knob to adjust the sound of the MIC channel.
BASS knob
Use this knob to adjust the sound in the low-frequency
range.
TREBLE knob
Use this knob to adjust the sound in the high-frequency
range.
13.
Use this knob to adjust the depth of the reverb effect for
the input connected to the MIC jack.
14.
Adjusts the overall volume.
Tip
15.
Hold down the
indicator lights up). To turn off the amp, hold down the
button until the power indicator turns off.
7
4 5 6
7
9 10 11
12
INSTRUMENT EFFECTS knob
MIC jack
PHANTOM switch
Be sure to turn off the PHANTOM switch when a micro-
phone that does not require phantom power is connected.
MIC VOLUME knob, CLIP indicator
MIC equalizer
As each knob is turned to the right, the range corre-
sponding to the knob will be emphasized. However, if
a range is overemphasized, feedback (howling) will be
more likely to occur.
MIC EFFECTS knob
MAIN VOLUME knob
A limiter is built into the power amp section of this
unit. Playing with the MAIN VOLUME knob turned up
will create a compressed sound that stays clean. This
only works with the built-in speaker.
button, power indicator
button to turn on the power (the power
8
15
13 14
16 17
