Kamikaze KVS8000 Manual Del Usuario página 41

Warning!
If the branch to be cut is under tension, the bar could get stuck and the user will lose control of the saw,
resulting in serious injury.
Therefore, first of all make a lightening cut (1) on the pressure side (A), then a cross-cutting cut (2) on
the pulling side (B).
•
Always keep the chainsaw at full speed.
•
Do not cut using the end of the bar.
•
Keep the bar vertical.
•
Constantly check that the lubrication is working correctly.
•
While moving the chainsaw from one branch to another, release the trigger to stop the chain.
•
While using the tool, keep every other part of the body at a minimum distance of 15 cm from the
chain.
•
Keep passers-by and other people at a minimum distance of 1.5m.
•
Do not use the tool in the rain or in humid environments.
•
After use, remove the battery from the chainsaw.
•
If left unused for 10 minutes, the chainsaw switches off automatically.
Warning: in case of difficult cut, check the battery charge and the correct sharpening and
tension of the chain.
41