EIO CLEAN DIMPLEX Targa 2000 Duo Manual Del Usuario página 17

Cleaning of the permanent box
(depending
on the configuration)
1. Pull the permanent box upwards out of the dust
space by the handle.
2. Undo the lock of the cassette lid in the direction
of the arrow. Empty the dust container. Pull out
the mesh filter and clean off any dirt (hair, fluff,
etc.) if necessary. Release the plaited filter by
turning it to the left and remove it from the dust
container. Clean both filters with a brush, which
can be found on the dust cassette.
If necessary, the filter can also be cleaned by hol-
ding it under lukewarm running water.
After it is completely dry, completely push the
mesh filter into the container in the direction of
the arrow until the end stop. Then, insert the plai-
ted filter and attach it by turning (see the imprint
on the plaited filter). Close the dust container with
the lid.
Attention:
Never put wet filers into the appliance!
Never vacuum without an inserted plaited filter.
Never vacuum with a damaged plaited filter.
Likewise, dry the dust container if it becomes wet.
Mesh Filter
To achieve optimum suction results, the dust
container should be emptied and cleaned after
each use.
After vacuuming multiple times, the dust contai-
ner may become scratched on the inside and be-
come milky. This has absolutely no effect on the
functioning of the vacuum cleaner. This means it
continues to be completely functional.
Important Information:
Plaited filter
When working with the permanent box, we
recommend reducing the power of your vacuum
cleaner by approx. 1/3.
That way, you will reach optimal utilization of the
existing dust capacity of your box.
When vacuuming at maximum power, the fill lever
display may start blinking too early. This is not a
malfunction of the appliance.
17