Adding Nails; Functions; Stapling & Nailing - Parkside PAT 4 D5 Traducción Del Manual De Instrucciones Original

Pull back on the pusher
Add staples to the magazine
After adding staples, slide the pusher
zine is fully closed. Release the release button
4
and lock into place for the magazine
Note: Use the window on the fill indicator
zine is empty.
4

Adding nails

Set the On / Off switch
the product.
Turn the product over.
Squeeze the release button
Pull back on the pusher
Follow icon shown on pusher
magazine
4
After adding nails, slide the pusher
is fully closed, (see Fig C).
4
Release the release button
the magazine
Note: Use the window on the fill indicator
magazine
4

Functions

Stapling & Nailing
Set the On / Off switch
Press the safety contact
Squeeze the trigger
piece to drive a staple / nail into it.
68 GB/MT
(see Fig. B).
3
4
to the "0" position before working on
8
3a
(see Fig. B)
3
3
(see Fig. C)
. It must click and lock into place for
3a
to be closed correctly.
4
is empty.
to the "I" position to switch the product on.
8
into the work piece.
6
whilst holding the product against the work
1
(see Fig. C).
in again until the maga-
3
to be closed correctly.
4
to see if the maga-
5
(see Fig. B).
(see Fig. C) and add nails to the
in again until the magazine
3
to see if the
5
. It must click
3a