Idiomas disponibles
Idiomas disponibles
Room Temperature Inspection
In addition to the humidity level, the digital display can also indicate the current room temperature. Please check as follows:
Press and hold the ADD/MINUS button for 5 seconds.
The screen displays the temperature in degree Celsius for 5 seconds.
Auto Restart function
When there is a power outage, the dehumidifier automatically restarts when the power comes back on and also resumes
settings.
Automatic Defrost function
At low room temperatures (below 16 ℃), frost may build up at the evaporator reducing the airflow across it during
dehumidifying.
The dehumidifier will automatically start defrosting for 10 minutes.
The POWER LED blinking.
The compressor stops and the fan keeps running.
Do not turn off the unit and it will automatically restart dehumidifying.
Inspect air filter
The air filter requires regular cleaning. The inspect filter LED will light up after every 600 hours accumulated operation
reminding user to clean the filter. The air filter is reusable and washable.
Press and hold the POWER button for 5 seconds to reset the filter inspection LED.
Overload Protection
In the event of a power loss, to protect the compressor there is a 3-minute delay until the compressor restarting
WATER DRAINAGE
Water Tank:
When the water tank is full, the water full indicator shows red to warn that the tank has reached the maximal
capacity.
How to empty the water tank:
1. Pull the water tank at the back of the
machine slightly, the water tank is forced to
move out.
55
