Ingeteam STORAGE 1Play TL M Manual De Instrucciones página 13

Ingeteam
2.1.2 Wiring of CAN communication cable
The communication between the battery and the inverter can be done by an Ethernet wire that it
connects to the "IN" connector of the battery.
This can be done, for example, with an Ethernet wire. Connecting the RJ45 connector of the
wire to the battery connector.
The DIP Switch of the battery that is directly communication with the inverter must be in this
position:
In case of a storage system with two or more batteries, the DIP Switch of the rest of the
inverters should be in this position:
ABH2010IMC26_.docx
Use and settings of the INGECON SUN STORAGE 1Play TL M working with
B3/B4850/A48100/POWERBOX of DYNESS
13