Idiomas disponibles
Idiomas disponibles
• BUFFALO recommend that this appliance should be periodically
tested (at least annually) by a Competent Person. Testing should
include, but not be limited to: Visual Inspection, Polarity Test,
Earth Continuity, Insulation Continuity and Functional Testing.
• BUFFALO recommend that this product is connected to a circuit
protected by an appropriate RCD (Residual Current Device).
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of
this machine will provide the best possible performance from your BUFFALO product.
Pack Contents
The following is included:
•
BUFFALO Carving Station Food Warmer
•
Instruction Manual
BUFFALO prides itself on quality and service, ensuring that at the time of packaging the contents are
supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.
Operation
•
Turn the appliance On/Off using the power switch on the stem of the appliance.
Note: The appliance only maintains temperature, it does NOT continue to cook
food.
Cleaning, Care & Maintenance
•
A BUFFALO dealer or qualified technician should carry out repairs if required.
•
Always switch off the appliance, disconnect the power supply and allow to cool before
cleaning or performing maintenance.
Troubleshooting
Fault
The unit is not
The unit is not switched on
working
Plug or lead is damaged
Fuse in the plug has blown
Power supply
Lamp expired
DB455_ML_A5_v4_20210831.indb 3
DB455_ML_A5_v4_20210831.indb 3
Probable Cause
Check the unit is plugged in correctly and switched on
Call BUFFALO agent or qualified Technician
Replace the fuse
Check power supply
Replace lamp, part number AE307 or AG570
UK
Solution
2021/8/31 13:12
2021/8/31 13:12
3
