Andis D-8 Instrucciones De Uso Y Cuidado página 5

WARNING: Do not attempt to destroy or disassemble
trimmer or remove any of its components. Also, never
touch metal terminals with metal objects and/or body
parts, as short circuit may result. Keep away from
children. Failure to comply with these warnings could
result in fire or serious injury.
16. This appliance is only to be used with the power supply unit
provided with the appliance.
17. This appliance is only supplied at safety extra low voltage
corresponding to the marking on the appliance.
18. Keep the appliance dry.
SAVE THESE INSTRUCTIONS
REFER TO PAGE 2 FOR FIGURES.
UNIVERSAL AC/DC POWER ADAPTER
The unit/charging stand is equipped with a universal AC/DC power adapter. Three interchangeable
input plugs are included for use in most countries around the world (Figures A-C). Plugs may vary by kit.
REMOVING INPUT PLUG:
1. Unplug AC/DC power adapter from wall outlet.
2. While pressing down on button located on input plug, gently push up on plug until it releases
from power adapter.
REPLACING INPUT PLUG:
1. To replace input plug, align tabs on the AC/DC power adapter with slots on input plug (Figure D).
2. Gently push input plug into power adapter until it snaps into place.
OPERATING INSTRUCTIONS
• The battery is not intended to be replaced by the user.
• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing the battery.
• The battery is to be disposed of safely.
CHARGING TRIMMER
The AC adapter is intended for use with Andis model D-8 lithium-ion battery with a rated capacity of
3.7V 2.8 Wh. Remove the trimmer and AC adapter from the carton. Plug the AC adapter into a
240V AC outlet, or according to your local power standards. Plug the adapter cord directly into the
bottom of the trimmer (Figure E). The trimmer on/off switch must be in the OFF position for the
battery to charge. The green light on the trimmer will turn on.
The trimmer has not been charged at the factory. Please charge the trimmer for 2 hours
before the first use for maximum performance.
You can keep the trimmer plugged into the adapter when not in use. The adapter will maintain the
battery at full charge. The green light will turn OFF when the battery is fully charged. We
recommend that the adapter be unplugged if the trimmer won't be used for seven or more days.
5