Pur Line FRESH AIR 30 Manual De Instrucciones página 8

PARTS
OPERATION
Peculiar smell detector
Display panel
OPERATION
CONTROL PANEL
ON/OFF: to start up/ turn off the purifier
SPEED: 3 air speeds > "Sleep mode", "Standard", "Fast". It is suggested to choose "fast speed" to purify while obvious air
pollution or peculiar smell in the room. The "sleep mode" for sleep or night, the backlight is automatically out and the
speed is low by default.
TIMER: 2 options > "1 hour", "3 hours" . Slightly touch "Timer" button for successive choices.
FUNCTION: to turn on and turn off the UV lamp, which can sterilize the indoor air.
NEGATIVE ION: It is default to turn on "negative ion" function after starting up, which is automatically off after device
shutdown.
AUTOMATIC AIR QUALITY DETECTION: The device is equipped with built-in high sensitive peculiar smell sensor; it
detects the air quality immediately after starting up.
- POOR air quality: the device switches to "fast speed" mode and lock it (the user cannot manually change the air
speed).
- GOOD or MODERATE, the device exits the lock mode of "fast speed".
Note: within the 3mins after startup, the sensor is under warmup mode.
FILTER REPLACEMENT WARNING: When accumulated operational time reaches 1500hours, the 3 indicator lights of air
quality flash simultaneously, it reminds the user to replace the filter by alarm sound of "di di di". After the replacement,
push "Timer" and "Speed" buttons for 5 seconds to reset and eliminate the alarm.
REMOTE CONTROL: The effective distance is 4~5 meters. It is suggested to direct to the IR receiving window on the
right of the control panel to achieve a better function.
Control panel
Air flow units
EN
Air outlet
Wall mounting bracket
Composite filter
6
Rear cover
Front cover