Idiomas disponibles
Idiomas disponibles
NAME OF MAJOR PARTS
1
Blade
2
Front handle
3
Recoil starter
4
Fuel tank cap
5
Carburetor
6
STOP Switch (ON-OFF)
FUELS/REFUELLING
Fuel and oil mixture
Inspect the fuel tank and fill with clean, fresh fuel of the proper mixture to assure the
longer life of the tool. Use the following mixed gas.
Gasoline: applicable genuine two-stroke engine oil=25:1
Gasoline: Other manufacturer's two-stroke engine oil=25:1 recommended.
FOR CALIFORNIA REGULATION
THIS EQUIPMENT IS CERTIFIED TO OPERATE: GASOLINE +TWO STROKE ENGINE OIL.
WHEN MIXING GASOLINE WITH TWO-STROKE ENGINE OIL.USE ONLY GASOLINE
WHICH CONTAINS NO ETHANOL OR METHANOL (TYPES OF ALCOHOL). THIS WILL HELP
TO AVOID POSSIBLE DAMAGE TO ENGINE FUELL LINES AND OTHER ENGINE PARTS. DO
NOT MIX GASOLINE AND OIL DIRECTLY IN THE FUEL TANK.
IMPORTANT:
Failure to follow proper fuel mix instructions may cause
damage to the engine.
- The engine of the hedge trimmer is a high-efficiency two-
stroke engine it is run with a mixture of fuel and two-stroke
engine oil. The engine is designed for unleaded regular fuel
with a min. Octane value of 91 ROZ.
In case no such fuel is available, you can use fuel with a
higher octane value. This will not damage the engine, but
may cause poor operating behavior.
A similar situation will arise from the use of leaded fuel.
To obtain optimum and to protect your health and the
environment, only unleaded fuel should be used.
- For lubricating the engine use a two-stroke engine oil
(quality grade TC-3), which is added to the fuel.
NAME OF MAJOR PARTS
7
Throttle lever
8
Rear handle
9
Muffler
10
Gearbox
11
Blade cover
