TQ HPR Range Extender V01 160 Wh Manual Del Usuario página 14

Ocultar thumbs Ver también para HPR Range Extender V01 160 Wh:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
3.3
Notes on Charging
NOTE
The temperature of the Range Extender must be within the permissible
charging temperature range (0 °C to 40 °C / 32 °F to 104 °F). Otherwise the
charging process will not start.
— The Range Extender can be charged directly on the e-bike or separately.
— The drive system is deactivated during charging when the Range Extender
is connected to the battery charging port in the bicycle frame.
— The charging status of the Range Extender can be read on the display and
on the 5 LEDs on the side of the Range Extender. Briefly cover the light
sensor to the left of the LEDs with a finger to activate this display.
— New Range Extenders have a state of charge of 20% to 30% due to trans-
port regulations and must be recharged within less than 6 months after
manufacturing.
— The Range Extender should be recharged immediately after it has been
completely discharged (state of charge <5 %).
— 1 charge cycle can consist of a full charge of the Range Extender capacity
(0% to 100%) or several partial charges that add up to 100% of the charge
capacity.
— The Range Extender capacity should be at least 60 % after 500 charging
cycles.
EN - 13
loading

Productos relacionados para TQ HPR Range Extender V01 160 Wh