Idiomas disponibles
Idiomas disponibles
3.1.5
Connect the connection cable to the Range Extender
► Connect the plug (Pos. 1 in Fig. 7)
of the connection cable to the
socket (Pos. 2 in Fig. 7) in the
Range Extender.
► Fasten the connector to the Range
Extender with the M3 x 8 socket
head screw (Pos. 3 in Fig. 7)
included in the scope of delivery
of the cable, with a torque of 1 Nm.
Never use a longer screw. Other-
wise there is a risk of damaging
the electronics in the Range
Extender.
NOTE
Connecting cables are available in various versions with different cable
lengths and connector orientations to meet the requirements of the respec-
tive installation situation.
► Enquire at the e-bike manufacturer about the connection cable you
need.
3.1.6
Connect the connection cable to the charging port of
the e-bike
► Unfold the cover (Pos. 1 in Fig. 8)
of the charging port (Pos. 2 in
Fig. 8) on the e-bike frame.
► Check that the terminals in the
charging port are free of dirt and
clean them if necessary.
► Align the connector (Pos. 3 in
Fig. 8) of the connection cable so
that the connector coding of the
plug and charging port match.
► Insert the plug into the charging
port and secure the plug with the
cover (Pos. 1 in Fig. 8).
EN - 10
2
Fig. 7:
Fasten the connection cable to
the Range Extender
Fig. 8:
Connect the connection cable
to the charging port
3
1
3
1
2
