Idiomas disponibles
Idiomas disponibles
CAUTION
Risk of accident due to activated drive system during the charging pro-
cess
► Always connect the Range Extender to the charging port of the battery
in the bicycle frame when you have installed the Range Extender on the
bicycle.
This is the only way to ensure that the drive system is deactivated during
charging. Otherwise there is a risk that you can start the drive system during
charging and that the plugged-in charging cable will cause damage or leads
to a crash.
► Connect the charger to the power supply.
► Unfold the cover (Pos. 1 in Fig. 9)
on the charging port of the Range
Extender.
► Check that the terminals in the
charging port (Pos. 2 in Fig. 9)
are free of dirt and clean them if
necessary.
► Insert the charging plug (Pos. 3
in Fig. 9) of the charger into
the charging port of the Range
Extender.
► Pull the charger plug of the
charger out of the charging port of
the Range Extender when charging is complete.
► Close the cover on the charging port when charging is complete.
► Disconnect the charger from the power supply.
EN - 12
1
2
Fig. 9:
Range Extender charging
3
