JETT 16 Guía De Montaje página 11

3.9
Fig. 3.9
Do not touch the wrench gauge faceplate with your fingers when torqueing as this could
„
give you a false reading.
9
3.10
1/16th
0°
90°
180°
Fig. 3.10
HOW TO USE THE FLAT WRENCH
When using the provided flat wrench, as indicated, use the following general guidelines to
achieve proper torque:
To properly tighten a bolt without a torque wrench, each bolt or nut must be turned a
„
specific amount to get it to its ideal torque range. The amount of rotation is listed for each
individual bolt and nut (Section 2).
When using the flat wrench, start at a position where the bolts or nuts are loose and can
„
spin freely, then start turning the bolt or nut clockwise until some tension is felt.
Once tension is felt, tighten the bolt or nut the specified amount of rotation.
„
3/8th
0°
90°
180°