GBS Jolly line CWM-1737 Instrucciones De Montaje página 11

HANG THE TV WITH SUPPORT ON THE WALL PLATE
Warning: Two persons are recommended for performing these
operations.
• After having securely fastened the plate to the wall, gently lift
the television and latch the adapter to the wall bracket, inserting
it in the guides and sliding it down as shown in Figures 5.1 and
5.2.
Important: Before releasing the television, make sure that it is
correctly latched.
Wrap the cable into a coil so that it is attracted by the magnetic
strip and remains located on the back of the screen.
INSTALL THE MAGNETIC STRIP
Remove the adhesive back from the magnetic foil and stick it on the
back of the television as shown in Figure 4.1.
REMOVING THE TELEVISION FROM THE SUPPORT
To remove the television from the support, pull down
the cable so as to unlock the adapter, and then slide the
television so as to free it from the support and remove it
as illustrated in Figure 6.1.
• After having mounted the support and television, make
sure that they are sufficiently fixed and secure for use.
You should check that the screws are well-fixed every
two months.
• If there are any doubts regarding the installation,
please contact your dealer or our assistance service for
any explanations.
fig. 6.1
11
MAINTENANCE
fig . 5.2