FREQUENT ASkED QUESTIONS
What ANT+™ devices is ROTOR Power compatible with?
Go to the ANT+™ link: http://www.thisisant.com/directory
What software can I use to analyze my data?
http://home.trainingpeaks.com
http://goldencheetah.org/
http://www.o-synce.com/en/software/training-software.html
http://www.garmin.com/en-US
Why isn't my computer pairing the power meter?
To pair the ROTOR Power with any ANT+™ device:
Start the power meter system by turning cranks 2-3 times until the
red LED on crank starts flashing.
Wait until red LED on crank stops flashing.
The ROTOR Power starts sending the radio signal and is ready for
measuring information.
Push the "SCAN" button in your ANT+™ device at the ANT+™
Power screen. The "SCAN" button is usually placed in the menu:
Settings/Bike settings/ Bike profiles/ "Your profile"/ANT+ Power.
52
USER MANUAL - FREqUENT ASKED qUESTIONS
What are the left & right power readings?
ROTOR Power starts measuring automatically after moving the
crank. In normal use, sampling is done every 2ms (500 times per
second) and sent by radio emissions to your ANT+™ device.
ROTOR Power sends the following data to the ANT+™ device:
POWER: Total power output measured in watts for both legs.
BALANCE: Left – Right leg percentage contribution to power.
TORQUE EFFECTIVENESS (Left/Right): Positive power
contribution to total power in a pedaling cycle. Measured as a
percentage; 100% means no negative power.
PEDAL SMOOTHNESS (Left/Right): Ratio between average power
and peak power in pedaling cycle. Measured as percentage.
CADENCE: measured in RPM (revolutions per minute).
How do I get spare parts?
Please contact your shop or local distributor.
Who do I contact for warranty issues?
Please contact your shop or local distributor.
What is the working temperature range for the cranks?
The optimal operating temperature range is from -5º to +55º
Celsius. Out of this range, some electrical components may cause
an inaccurate measurement signal or even a lack of it.