Pairing - ROTOR ROT112 Manual De Usuario

PAIRING

Connect your ROTOR Power to any ANT+
sensor device to display output values.
For a complete listing of ANT+
and their specific interoperability, visit the ANT+
Product Directory: http://www.thisisant.com/directory/
Read the ANT+ device manual for further
TM
instructions.
Before pairing ROTOR Power with a monitor, make
sure you are at least 10 meters (30 feet) away from
any other ANT+ Power sensor. This will prevent
TM
accidentally pairing to another Power sensor.
The ROTOR Power retains its "SENSOR ID" throughout
battery replacements and will remain properly paired.
38
pAIRING pROCESS
TM To pair the ROTOR Power with any ANT+
1.
Certified Products
TM
TM
2.
LED
USER MANUAL - PAIRING
Start the power meter system by riding a few
meters until the red LED starts flashing.
The system turns on when a 1,5 kg force is applied
to the cranks.
Wait until red LED on crank stops flashing.
The ROTOR Power starts sending the radio signal
and is ready for measuring information.
Power meter
device:
TM