Charging The Battery; Maintenance And Cleaning; Troubleshooting - MELINERA 10362A Instrucciones De Montaje

... / Maintenance and cleaning / Troubleshooting
Close the battery compartment and tighten the fixing screws using
a small cross-tip screwdriver.
Slide the ON / OFF switch
Flip down the solar cell housing / battery compartment

Charging the battery

Please note, the solar light must be switched on when charging the
battery. The charging time via the solar cell varies by the intensity of
the sunlight and the incidence angle of light onto the solar cell. Place
the solar cell as perpendicular as possible to incidence angle of light.
This will ensure the brightest light.

Maintenance and cleaning

The LEDs cannot be replaced. The solar light is maintenance-free except
for replacing the battery as necessary.
Do not use solvents, petrol, etc. This will damage the product.
Regularly clean the LED solar light with a dry, lint-free cloth. Use a
slightly moist cloth if very dirty.

Troubleshooting

Note: The device contains sensitive electronic components. Radio
transmitting equipment in the immediate vicinity may therefore cause
interference. If you notice the device is malfunctioning, remove any
sources of interference from the area around the device.
to the "ON" position.
6
.
4
GB/IE 27