Technical Data
Description
Net Weight
Air Speed
Air volume
Sound Level
Motor Rated Power
Motor Maximum Speed
Idle Speed
Fuel Consumption
Fuel Tank
Work Cycle
Fuel Specifications
• The tool is built with an air-cooled, 2-strike engine using unleaded gasoline and high-quality auto-mixing oil with fuel
stabilizer specified for air-cooled, 2-stroke engines.
• The motor is certified to run with unleaded gasoline for vehicles with octane rating 87 ([R+M]/2) or higher.
• Do not use any type of pre-mixed gasoline with oil sold in service stations, especially for motorcycles, etc.
• Do not use engine oil for self-propulsion, or two-cycle oil outboard motor.
• The ratio in the mix shall be 50 parts of gasoline per 1 part oil (50:1 ratio). Prepare the mix in a container approved to
store gasoline. Always mix thoroughly before pouring into the motor tank.
CAUTION
Do not use gasoline mix that has been stored for more than 15 days. Mix small amounts.
Never smoke in the vicinity of the fuel or the filling up area, or where the mix is being prepared, or
WARNING
when operating the tool.
WARNING
Trying to start the tool failing to add oil into the fuel mix will cause the motor to malfunction.
Unleaded
Gasoline
1 liter
2 liters
3 liters
4 liters
5 liters
To increase the working life or the motor use
Using the ACES-2, ACES-5 or ACES-20
Code
Motor
Two-Cycle
Motor Oil
+
A wrong mix may cause the motor to throw a rod causing expensive repairs!
4 capfuls
oil
SOPLA-26
18147
Gas Backpack Blower
12.5 lb
26 cc
180 MPH
335 CFM
109 dB
0.85 HP
8500 RPM
2 800 RPM – 3 600 RPM
0.14 Gal / h
0.06 Gal
30 minutes' rest per each tank consumed
Maximum 6 hours daily.
20 ml
=
40 ml
60 ml
80 ml
100 ml
synthetic oil for 2-stroke motors.
oils* cap as measure, mix 4 capfuls oil per each liter gasoline
Mix
50:1
1 liter
1 L
gasoline
ratio
50:1
Mix
ENGLISH
3
