Vornado SILVER SWAN Manual De Instrucciones página 5

DÉPANNAGE
Problème Cause Possible Et Solution
L'appareil n'est pas branché à l'électricité. Branchez le cordon d'alimentation à une prise électrique.
L'APPAREIL NE
DÉMARRE PAS
Assurez-vous de la sélection du bon réglage de la vitesse du ventilateur.
Le fusible de la prise a sauté. Remplacez le fusible. Voir les instructions d'entretien par l'utilisateur en vertu des instructions importantes.
L'appareil est endommagé ou requiert une réparation. Cessez son utilisation et débranchez-le. Communiquez avec le service à la clientèle
pour recevoir de l'aide.
La prise est usée ou endommagée. Essayez une autre prise ou communiquez avec un électricien qualifi é.
LA CIRCULATION L'appareil est réglé à une vitesse lente. Ajustez le réglage en sélectionnant une vitesse plus élevée.
D'AIR EST FAIBLE
La circulation d'air est bloquée. Remédiez à l'obstruction.
OU LENTE
Ajustez l'orientation de la circulation d'air vers l'utilisateur.
Dans certaines conditions, il est possible qu'un DDFT (disjoncteur de fuite de terre) avec touche de réinitialisation soit déclenché quand
LE DDFT A ÉTÉ
l'utilisateur change la vitesse d'un produit Vornado. Dans ce cas, branchez l'appareil dans une prise non reliée à un DDFT. Le problème peut
DÉCLENCHÉ.
aussi indiquer que la prise reliée au DDFT est faible ou défectueuse. Contactez un électricien compétent pour faire vérifi er la prise reliée
au DDFT.
36 Français
service agent, or similarly qualifi ed persons in order to avoid a
hazard. Contact Vornado Consumer Service at 1-800-234-0604
(phone) or [email protected] (email) for further
instructions about replacement and repair.
- Before plugging power cord into electrical outlet, be sure that
all electrical information on the rating label, including voltage, is
compatible with your outlet's power supply.
- Do not sit or stand on product.
- Never use the cord as a handle or otherwise yank, strain or stretch
the power cord.
- While the product is plugged in, do not insert or allow foreign
objects to enter any input or output opening as this may cause risk
of electric shock or fi re, or damage the product.
- A loose fi t between wall outlet (receptacle) and plug may cause
overheating and distortion of the plug. Discontinue use of the
product in this outlet. Contact a qualifi ed electrician to replace
loose or worn outlets.
- This appliance has a polarized plug (one blade is wider than the
other.) To reduce the risk of electric shock, this plug is intended to
fi t in a polarized outlet only one way. If the plug does not fi t fully in
the outlet, reverse the plug. If it still does not fi t, contact a qualifi ed
electrician. Do not attempt to defeat this safety feature.
- Before moving, repositioning, servicing, cleaning and when not
in use, use the product controls to turn off the power and then
unplug. To disconnect from outlet, grasp and pull only the plug.
Also, power off and unplug if the product will be left unattended
for an extended period of time or during electrical storms.
SERVICING WARNING—TO REDUCE RISK OF FIRE,
ELECTRICAL SHOCK AND INJURY TO PERSONS, OBSERVE THE
FOLLOWING:
- Clean your product regularly, only as is instructed in this manual.
Prior to cleaning, turn off the power on your product and
unplug. Do not use gasoline, thinners, solvents, ammonias
or other chemicals for cleaning. Refer to the CLEANING
instructions provided.
- Do not open appliance housing while product is plugged in. To
avoid risk of shock, all service and/or repairs must be done by a
Vornado Authorized Service Center.
- This product employs overload protection (fuse). A blown fuse
indicates an overload or short-circuit situation. If the fuse blows,
unplug the product from the outlet. Replace the fuse as per the
user servicing instructions (follow product marking for proper fuse
rating) and check the product. If the replacement fuse blows, a
short-circuit may be present and the product should be discarded
or returned to an authorized service facility for examination and/or
repair.
USER SERVICING INSTRUCTIONS
1. Using the product controls, turn off the appliance.
2. Grasp the plug (not the cord) and disconnect from the outlet.
3. Risk of Fire. Replace fuse only with 2.5 Amp, 125 Volt fuse as
approved by Vornado Consumer Service. For an authorized
replacement fuse, please contact Vornado Consumer Service.
4. Once the replacement is received, use a small fl at-head
screwdriver to slide open the fuse cover (located on the plug)
(See next page, Fig. A).
5. Remove fuse by using the screwdriver to gently lift each end of
the fuse (See next page, Fig. B).
6. Install the replacement fuse by using the screwdriver to gently
push each metal end of the fuse into the receptacle one at a
time. Do not push on the center of the fuse—it is fragile and
may break.
7. Slide the fuse cover closed using the screwdriver. When closed,
the cover should fi t completely in the plug. No part of the cover
should stick out (See next page, Fig. C).
English 5