Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3
Default Setting Configurations
Power-On Option
To select power-on options listed in
then press ON/OFF key to power-on the meter.
Table 3-1
Demonstrate Display Annunciators
To demonstrate the annunciators, press HOLD and turn on the meter
simultaneously. All annunciators will be displayed. Press any key to exit
demonstration mode.
Default Factory HI/LO Setting
To set the high and the low limits to manufacture's default values.
42
Power-ON Options
Key
HOLD
Demonstrate Annunciators
To demonstrate the annunciators, the entire annunciators will be
displayed. Press any key to exit demonstration mode.
Reset the high and the low limits to factory's default values.
RANGE
Fast power off test for factory's purpose
REL
To view the firmware version
SET
Setup mode
Configure related parameter, please refer to
more details
Table
3-1, press and hold the respective key
Selectable Parameters
Keysight U1701B User's and Service Guide
Selecting Setup Mode
for
Tabla de contenido
