Static Recording - Keysight Technologies U1701B Guía Del Usuario Y Servicios

2 Features and Functions

Static Recording

The static recording mode can record the maximum capacitance and minimum
capacitance you measured. Furthermore it is able to perform averaging on the
measurement result. Static recording captures only stable values and updates the
memory; the meter will not record values that are OL (overload) or below 10
counts.
The operational procedures are described below:
1 Press REC key momentarily to enter the static recording. The present value is
2 Press this key momentarily to cycle through maximum, minimum, average and
3 The beeper will beep once when a new MAX or MIN value has been recorded.
4 Selecting static recording mode as auto range, it will record the value of MAX,
5 Press REC key for more than 1 s to exit recording mode.
6 The auto power-off feature will be disabled and the
24
stored to memories of maximum, minimum and average. The MAX, AVG, MIN
annunicator will be lit.
present readings. The MAX, MIN, AVG or MAX AVG MIN annunciator turns on
respectively to indicate which value is being displayed (see
MIN or AVG for different ranges.
as recording mode.
Keysight U1701B User's and Service Guide
Figure 2-1).
will be turned off