Introduction; Device Description; Scope Of Delivery; Intended Use - Scheppach Trike S Traducción Del Manual De Instrucciones Origina

1.

Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
we hope your new tool brings you much enjoyment and
success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified.
Please consider:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual package with the machine at
all times and store it in a plastic cover to protect it from dirt
and moisture. They must be read and carefully observed
by all operating personnel before starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.

2. Device description

1. Handle
2. Sliding handle
3. Mounting screw sliding handle
4. Lower push bar
5. Dirt collecting container
6. Transport wheels
7. Feeder brushes
8. Belt drive
9. Sweeping brushes

3. Scope of delivery

• Feeder brushes
• Sliding handle
• Lower push bar
• Mounting screw sliding handle
• Operation manual
• Enclosed accessories bag
a. Flat round screw M8 x 25mm
b. Fillister head screw (self-tapping) 4,2 x 15 mm

4. Intended use

• The machine is designed and built according to the
state-of-the-art and the safety-related standards.
Nevertheless, the use of the machine might involve
risks such as personal injury, danger to life for the
user or third parties, or damage to the machine and
other material property.
• The machine is to be used only in a technically
flawless condition as well as in accordance with
the manufacturer's instructions and in a safety and
risk-conscious manner while adhering to the oper-
ating instructions! In particular, failures which may
impair the safety must be resolved immediately (by
you or an expert)!
• Sweeping of flat and dry surfaces – e.g. entries, ter-
races, courtyards, etc.
• The machine may be operated only with original
parts and original accessories of the manufacturer.
• Any other use above or beyond this is considered
improper use. The manufacturer is not liable for
damages resulting from this. The user shall bear this
risk alone.
www.scheppach.com GB | 11