En - Mc - FITFIU FITNESS MC-500 Manual De Usuario

ASSEMBLY
Step by step
01
Use the M8x45 (x2) side
screws to attach the side
02
arms to the machine. Tip: do
not fully tighten the screws
until the whole structure is
assembled.
Use the front M8x20 (x4)
screws + M8 washer (x4) to
fix the arms.
M8x20
(x4)
Tighten all screws until the
whole structure is securely
M8
(x4)
fixed.
Go to the next step.
Take out the main structure of
the box and its accessories.
Once on the floor, lift the
arms of the conveyor belt
and place them in a vertical
position, as shown in the
picture. Let's move on to
the next step. CAUTION!
Be careful not to pinch the
display wires.
M8x45
(x2)
19
03
M8x20
(x2)
M8
(x2)
Use the ST4x15 screws to fit
04
the plastic housing to the end
of the bracket.
ST4X15

EN - MC-500

Insert 2 M8x20 screws with
M8 washers (x2) to fix the
console to the machine arms
You're almost there!
ST4X15