EQUATION L2 OPEN 9 Manual De Instalación página 61

Nominal useful power emitted in the room
Useful partial load emitted in the room
Overall power (input power) with useful nominal power
Global power (input power) with useful power at partial load
Device efficiency with nominal useful power
Device efficiency with partial loading power
CO emission to an oxygen content of 13 % with the useful nominal power
CO emission to an oxygen content of 13 % with the useful nominal power
CO emission to an oxygen content of 13 % with useful power at partial load
CO emission to an oxygen content of 13 % with useful power at partial load
NOX emission to an oxygen content of 13 % with the useful nominal power
NOX emission to an oxygen content of 13 % with useful power at partial load
Emission of volatile organic compounds to an oxygen content of 13 % with the useful nominal
power
Emission of volatile organic compounds to an oxygen content of 13 % with useful power at
partial load
Particle emission to an oxygen content of 13 % with the useful nominal power, measured by a
heating filter
Particle emission to an oxygen content of 13 % with useful power at partial load, measured by a
heating filter
Minimal draught with nominal useful power
Minimum draught with useful power at partial load
Safety distance between the rear and the combustible material
Safety distance between sides and combustible material
Safety distance between the top and the combustible material in the ceiling
Safety distance between the front and the combustible material
Auxiliary electrical energy consumption
Nominal useful smoke outlet temperature
Smoke output temperature with useful power at partial load
Mass flow of fumes with nominal useful power
Mass flow of fumes with useful power at partial load
CO2 concentration with nominal useful power
CO2 concentration with useful power at partial load
Diameter of the evacuation nozzle
General dimensions of the device (width, height, depth)
Weight of the device
Supply voltage
Supply frequency
Test conditions : announced performances are sensitive to many parameters, and mainly the test pellet quality, and lab
equipments and setup. The manufacturer can provide some specific settings in order to adapt to the test conditions. Also,
please note that announced performances will be reached after several working hours at nominal power (stove pre-
conditioning), and if possible at least 15 hours.
Description
61
EN 2
Setting Unit
Pnom kW
Ppartielle kW
- kW
- kW
ηnom %
ηpart %
COnom (13 % O2) mg/m³
COnom (13 % O2) %
COpart (13 % O2) mg/m³
COpart (13 % O2) %
NOxnom (13 % O2) mg/m³
NOxpart (13 % O2) mg/m³
COVnom (13 % O2) mg/m³
COVpart (13 % O2) mg/m³
PMnom (13 % O2) mg/m³
PMpart (13 % O2) mg/m³
pnom Pa
Ppart Pa
dR mm
dS mm
dC mm
dp mm
W W
Tnom °C
Tpart °C
- g/s
- g/s
- %
- %
dbuse mm
L, H, W mm
m kg
U V~
f Hz
EN
Table 3
Value
9
3,7
9,6
3,9
94,2
95
21
0,001
197
0,016
130
123
2
2
10
18
8
4
200
400
1500
1000
300
112,9
76,4
5,2
3
12,9
8,8
80
475 x 1000 x 533
88,6
230
50