Reversing The Door Opening Direction - Selecline 154589 Manual De Utilización

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
Positioning
Install the appliance in a location with an ambient temperature corresponding to
the climate class indicated on the rating plate of the appliance:
■ Extended temperate: 'this refrigerating appliance is intended to be used at
ambient temperatures ranging from 10 °C to 32 °C.
■ Temperate: 'this refrigerating appliance is intended to be used at ambient
temperatures ranging from 16 °C to 32 °C.
■ Subtropical: 'this refrigerating appliance is intended to be used at ambient
temperatures ranging from 16 °C to 38 °C.
■ Tropical: 'this refrigerating appliance is intended to be used at ambient
temperatures ranging from 16 °C to 43 °C.
Location
■ The appliance should be installed far away from sources of heat such as
radiators, boilers and direct sunlight. Ensure that air can circulate freely around
the back of the appliance. Ideally, the appliance should not be positioned below
any overhanging wall units. However, if it is placed under an overhanging wall
unit, make sure there is a clearance distance of at least 50 mm.
■ Accurate levelling is ensured by one or more adjustable feet at the base of the
appliance.
■ This appliance is not intended to be used as a built-in appliance.
WARNING! Make sure the plug is easily accessible to disconnect the appliance at
any time.
Electrical Connection
■ Before plugging the appliance in, ensure that the voltage and frequency
shown on the rating plate corresponds with your domestic power supply. The
appliance must be grounded/earthed. The power supply cord plug is provided
with a contact for this purpose. If the domestic power supply socket is not
grounded, connect the appliance to a separate earth in compliance with current
regulations. Consult a qualified electrician.
■ The manufacturer declines all responsibility if the above safety precautions are
not observed.
■ This appliance complies with the E.E.C. Directives.

REVERSING THE DOOR OPENING DIRECTION

Tools required: Philips screwdriver, flat-bladed screwdriver and an adjustable
wrench or spanner.
Notes:
■ Ensure the appliance is unplugged and empty.
■ To remove the door, it is necessary to tip the appliance backwards. Rest the
appliance on something solid so that it will not slip during the door reversal
process.
10
Tabla de contenido
loading

Tabla de contenido