Environmental Instructions; Accessories And Spare Parts - Würth HRS 3 Traducción Del Manual De Instrucciones De Servicio Original

Fault
Device does not spray when the
trigger lever [5] is pressed
Spraying result irregular
The tank cannot be unscrewed
Note
Do not immerse the device completely
in the solvent; clean using a soft brush
or cloth.
Do not clean the components of the device using
■
wire brushes or sandpaper.
On no account should acids or alkaline
■
cleansing agents be used for cleaning.
If necessary lubricate the nozzle needle and air
■
vent rod.
Check the thread regularly for wear to ensure
■
parts such as the tank or adjustment wheel do
not unintentionally become loose.
After cleaning, maintenance and/or repair
■
work, check that all screws and nuts are securely
tightened.

Environmental instructions

Do not dispose of this device with
normal household waste. Dispose of
the device via an approved waste
disposal company or via your local
authority waste disposal facility.
Observe the currently valid regula-
tions. In case of doubt, contact your
waste disposal facility. Dispose of all packaging in
an environmentally compatible manner.
Troubleshooting
Possible cause
No air supply
Vertical tube dirty or blocked
Residual pressure in the tank
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note).
Damage that has occurred will be corrected either
by replacement or by repair. Damage caused by
improper handling is not covered by the warranty.
Claims under warranty can only be accepted if
the device is returned fully assembled to a Würth
agency, your Würth sales representative or an
authorised Würth customer service workshop.
Subject to technical changes without prior notice.
We accept no liability for printing errors.
If, in spite of careful manufacturing and test proce-
dures, the device becomes faulty, contact Würth
masterService to arrange a repair.
With any enquiries or spare parts orders, always
quote the item number as given on the device type
plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsman-
ager. Alternatively, contact your local Würth agency
for a hardcopy.
Remedy
Check the air supply, open the
discharge control wheel [14]
Check whether the pressure
tank is filled with product
Clean all tubes and spray
nozzle
Never tip the device through
more than 45°
Pull on the ring of the safety
valve [8] (Fig. II)
Warranty

Accessories and spare parts

15