Store The Machine; Troubleshooting; Technical Data - GreenWorks DT40B00 Manual Del Operador

EN
12. Lock down the lock handle (23) and push back the slide
button (22) to secure the cylinder.
Follow the instructions as mentioned above while replacing
a tine cylinder.
5.3

STORE THE MACHINE

• Remove the safety key.
• Remove the battery pack(s).
• Clean the machine before storage.
• Make sure the motor is not hot when you store the
machine.
• Make sure that the machine does not have loose or
damaged parts. If it is necessary, follow these
instructions:
• Replace the damaged parts.
• Tighten the bolts.
• Speak to a person at an approved service center.
• Store the machine in a dry area.
• Make sure that children cannot come near the machine.
6

TROUBLESHOOTING

Abnormal noise.
Clattering in the
unit. Whistling
sound.
Whistling sound.
Motor will not
start.
NOTE
Foreign objects on Switch off the de-
the dethatcher cyl- thatcher, wait until
inder are hitting the cylinder has
the dethatcher. stopped rotating.
Foreign objects Remove foreign
blocking the de- objects.
thatching cylinder.
Check the de-
thatcher immedi-
ately.
Belt slipping. Contact an author-
ized service cen-
tre.
Battery is not se- Ensure that the
cure. battery is fully se-
cured in the ma-
chine. Refer to In-
stall the Battery
section in this
manual.
Battery is not Charge the battery
charged. pack according to
the instructions in-
cluded with your
model.
English
The dethatcher is
hard to push.
Dethatching re-
sults are not satis-
factory.
* If you cannot find the solution to these problems, go to the
service center.
7

TECHNICAL DATA

Voltage
No load speed
Working path
Number of blades
Scarifying depth
Dethatching depth
Front wheel
Rear wheel
Weight (without
battery pack)
Battery model
Charger model
The recommended ambient temperature range:
Item
Dethatcher storage tempera-
ture range
Dethatcher operation temper-
ature range
Battery charging temperature
range
10
Switch off the mo-
Blocked by for-
tor, wait until the
eign objects.
tine cylinder
comes to a com-
plete stop. Re-
move the foreign
objects. After ap-
proximately one
minute, switch on
the dethatcher.
The grass is too Mow the lawn be-
tall. fore dethatching.
Spring tine wear. Adjust the de-
thatcher cylinder.
Belt fault. Contact an author-
ized service cen-
tre.
Lawn has grown Mow the lawn be-
too tall. fore using the de-
thatcher.
40 V
3900 RPM
14" (36 cm)
20 Pcs
1/4" / 0 / -1/4" / -3/8" / -5/8"
1/4" / 0 / -1/4" / -3/8" / -5/8"
7"
5"
22.7 lbs (10.3 kg)
BAF705/BAF701 and other BAF ser-
ies
29492/CAF806 and other CAF series
Temperature
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
39°F (4°C) - 104°F (40°C)