Time And Voice On/Off Of System Setup; Unit Conversion Mmhg/Kpa Display - Well Health WH-UAEBPM Manual De Instrucciones

TIME AND VOICE ON/OFF OF SYSTEM SETUP

1. Press "SET" key to Time display.
2. In the off state, Press and hold "SET" key until the year number
displays and flashes on LCD to enter setting mode.
3. Press "MEM" key to adjust the year, then press "SET" key again
to save your setting and enter the month setting mode.
4. Press "MEM" key to adjust the month. Following the same steps to adjust
date/hour/minute/Voice (on/off) until setting completed ("
Of) Non-talking model does not have this function.
SET

UNIT CONVERSION mmHg/kPa DISPLAY

The goods have mm Hg(mmHg), kPa (kPa) two kinds of blood pressure display
units (mmHg factory to express).
Press "ON / OFF" button for 10 seconds to display unit switching interface, then
press "MEM" key to select mmHg/KPa, press "ON/OFF" button to exit.
The units will be chosen by the above shows mmHg/kPa after decontrol, After the
nomal boot unit values are shown as blood pressure.
Also select memory unit value changes.
ON/OFF
mmHg mmHg
year month
mmHg mmHg
date hour
MEM
A M
PM
AVG
" is the On, "
mmHg mmHg
minute Voice
kPa mmHg
" is the