INDEX
1.
BURNER DESCRIPTION . . . . . . . . . . .
1.1
Burner equipment . . . . . . . . . . . . . . . . .
2.
2.1
Technical data. . . . . . . . . . . . . . . . . . . .
2.2
2.3
3.
3.1
3.2
3.3
3.4
3.4.2 Electrical wiring with gas leak control
device . . . . . . . . . . . . . . . . . . . . . . . . . .
1.
BURNER DESCRIPTION
Gas burner with one stage working.
The burner is approved for intermittent operation as per Directive EN 676.
The burner meets protection level of IP X0D (IP 40), EN 60529.
Gas train according to EN 676.
1 - Air-damper
2 - Screws for fixing the air-damper
3 - 7 pole socket for electrical supply
and control
4 - 6 pole socket for gas train
5 - Cable grommet
6 - Screw for fixing the cover
8 - Control box
9 - Reset button with lock-out lamp
NOTES
- The cable grommet (5) supplied with the burner, must be fitted to the same side of the gas train.
- After having installed the burner verify the access to the fixing screws of the cover.
If necessary replace them with the fixing screws (6, Fig. 1) supplied as equipment.
1.1 BURNER EQUIPMENT
Insulating gasket . . . . . . . . . . . . . No. 1
Cable grommet . . . . . . . . . . . . . . No. 1
Hinge. . . . . . . . . . . . . . . . . . . . . . No. 1
6 pin plug . . . . . . . . . . . . . . . . . . No. 1
2741
1
4.
WORKING . . . . . . . . . . . . . . . . . . . . . . .
1
2
2
2
2
3
3
diagnostics . . . . . . . . . . . . . . . . . . . . . . . 10
4
4
5.
WARNINGS . . . . . . . . . . . . . . . . . . . . . . 11
5
5
6.
6
7.
9
8
7
6
5
4
Screws and nuts for flange to be fixed to boiler . . .No. 4
Screws for fixing the cover . . . . . . . . . . . . . . . . . . .No. 3
7 pin plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .No. 1
1
GB
Fig. 1
D4182
3
6
6
6
7
7
7
8
8
1
2
2