Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. Preparation
This product includes a GLASS panel! Always use extreme caution when handling glass. Failure to
do so could result in personal injury or property damage.
Remove all parts and hardware from the carton and place them on a clean, soft, dry surface. Parts and assembly
steps are grouped for wall-hanging or recessing use. Check the parts list to make sure nothing is missing. Dispose
of packaging materials properly. Please recycle whenever possible.
You will need the following tools (not included): Phillips screwdriver; stud finder; level; tape measure; electric
drill; 1/4" wood drill bit, hammer.
3. Parts and Hardware
A – Fireplace
E - Wall Bracket
Fixed on back of firebox
4. Installation and Assembly
Your appliance is a wall-mounted appliance. Select a suitable location that is not susceptible to
moisture and is away from drapes, furniture and high traffic areas.
NOTE: Follow all National and local electrical codes.
MINIMUM CLEARANCE TO COMBUSTIBLES
Bottom
Sides
Back
Measurements are taken from the glass front.
0"
Top
0"
Top
0"
11
B – Wood Screws
Remote Control
C – Drywall anchors
Instruction Manual
39.37" (1000mm) to mantel
39.37" (1000mm) to
ceiling
Tabla de contenido
