Disposal; Troubleshooting - Zipper ZI-STE2000IV Instrucciones De Servicio

14.4

Disposal

Observe the national waste disposal regulations. Never dispose of the machine, machine
components or operating equipment in the residual waste. If necessary, contact your local
authorities for information regarding available disposal options. If you purchase a new
machine or equivalent equipment from your specialist dealer, he is obliged in certain countries
to dispose of your old machine properly.
15

TROUBLESHOOTING

If you are unable to carry out the necessary repairs properly and/or do not have the required training, always
consult a specialist to solve the problem.
Trouble
Engine does not start
Engine starts and
stalled immediately
Machine works
interruptions
Low oil light glows
Overload indicator light
glows
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
Possible cause
Incorrect starting sequence
•
Dirty air filter
•
No fuel supply
•
Fault in the fuel line
•
Engine flooded
•
• Spark plug connector not placed
on
• No ignition spark
• Insufficient engine oil
is
Incorrect idle adjustment
•
with
Carburettor
•
Spark plug fouled
•
Check engine oil level
•
To less or no engine oil
•
• High temperature
activated
• Overload protection activated
• Short circuit protection activated
Observe the correct starting
•
sequence
Clean/replace air filter
•
Refuel
•
• Check the fuel line for kinks or
damages
Screw off, clean and dry the
•
spark plug.
cranking rope several times
and reinstall the spark plug
• Place
connector
Clean/replace spark plug
•
Check ignition cable
•
• Check engine oil level
Contact the service team
•
Contact the service team
•
Clean/replace spark plug
•
• Check spark plug connector
Fill engine oil
•
Fill engine oil
•
protection
Cool down the engine
•
• Reduce existing load
• Check loads
TROUBLESHOOTING
Solution
Then pull the
on the spark plug
41
ZI-STE2000IV