Leveling Doors; Leveling Feet - Midea MDRF632FG Serie Manual De Usuario

2.8 LEVELING DOORS

Precautions before operation:
•
Before making changes
the refrigerator must be
disconnected from power.
Before adjusting the door,
precautions should be taken to
prevent any personal injury.
•
Schematic diagram of leveling
the door body
List of tools to be provided to the user
Not level
The picture above is only for reference.
The actual configuration will depend on
the physical product or statement by the
distributor
1) Raise the lower door up to the
level of the higher door.
2) Insert the supplied washers
in the gap between the hinge
grommet and the lower hinge by
using pliers. The number of washers
you will need to insert depends on
the gap.
When the fridge door is low:
Open the door; use a wrench to
loosen the locking nut and to turn
the adjusting nut counter-clockwise
to raise the door. Once the doors
are aligned, tighten the locking nut
by turning it anti-clockwise.
When the fridge door is high:
Open the door; use a wrench to
turn the adjusting nut clockwise to
lower the door. Once the doors are
aligned, tighten the locking nut by
turning it anti-clockwise.

2.9 LEVELING FEET

1) Precautions before operation:
Before making changes the
refrigerator must be disconnected
from power.
pliers
Before adjusting the leveling feet,
precautions should be taken to
prevent any personal injury.
Hinge
grommet Pliers
2) Schematic diagram of leveling
feet
Washer
Lower hinge
3) Adjusting procedures:
a. Turn the feet clockwise to raise
the refrigerator.
b. Turn the feet counter-clockwise
to lower the refrigerator.
c. Adjust the right and left feet
based on the procedures above to
a horizontal level.
IMPORTANT:
The picture above is only for reference.
The actual configuration will depend on
the physical product or statement by the
distributor
EN-19