Power Products GENERGY EZCARAY Instrucciones De Uso página 56

5 Once the engine starts, slowly rotate the DIAL to the RUN position according
to figure below.
NOTE: The engine must not be kept running in the CHOKE position, because
the mixture would be too rich and cause engine problems. So as soon as the
engine has started, the user must ensure that the DIAL is placed in the RUN
position.
Information: If the engine has recently stopped and is still hot, CHOKE position
procedure may not be necessary. In this case, to start directly, turn the DIAL to the
RUN position and press START in the center of the DIAL.
Information: The battery may be weak if the generator was stored for a long time.
If the battery is weak, the generator must be started manually (see chapter 5.2).
Automatically, during the running, the battery is charged.
54