Assembly - Scott Living HDSLFP48L-2A Instrucciones De Montaje

Assembly

1
Preparing base assembly
NOTE: Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all
bolts. This will make the assembly easier.
□
Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted
floor or the empty carton to avoid any scratches.
□
Securely screw the cam bolts (EE) into the designated small holes on the bottom panel (M) and skirtings (N, P and Q)
using a Phillips screwdriver.
2
Gluing wood dowels
NOTE: Refer to the dowel guide drawings in this step for further clarification on how to properly glue in the
wooden dowels. Apply this method whenever instructed to install wood dowels
□
Glue the wood dowels (CC) into the designated holes on the skirtings (N, O, P and Q). It is very important to use a
small amount of glue on both ends of dowels and wipe away the excess glue immediately.
P
M
N
O
CC
Q
CC
P
Q
.
CC
N
1 2
X
EE
The dowel assembling guide
3
X
4
FINAL